How To Improve Canon EOS M50 Mark II Battery Life

One of the most excellent mirrorless cameras available today is the Canon EOS M50 Mark II, part of the EOS line of products produced by the Canon brand. It is an incredible camera with various customization options, and the pricing point may be reasonable.

Long battery life is required to ensure all these functionalities function as intended. So what kind of battery does the Canon EOS M50 need, and how long does its battery life last before it has to be replaced? And if you observe that this camera has the ECO Mode, you will learn how it operates and what it accomplishes.

Canon EOS M50 Mark II Battery Life

When ultimately charged, the mirrorless Canon EOS M50 Mark II camera allows you to capture up to 305 pictures before it is set again. The CIPA requirements have been considered while determining the maximum number of shots it can deliver.

When compared to the battery life of mirrorless cameras, which typically allows for up to 370 images to be taken before needing to be recharged, the battery life of the Canon EOS M50 Mark II may be construed as being on the shorter end of the spectrum.

How long does the Canon M50 Mark II Battery last?

It is possible to record up to one hundred minutes of film continuously while shooting in continuous 4K mode and disabling all focusing and zooming features. Therefore, the time required to discharge a battery is significantly less than the time needed to charge it.

I have put this 4k video shot through its paces by not adjusting the camera’s direction, maintaining a constant focus on a single subject, and keeping all of my hands entirely still during the recording process. So simply tell me how long it takes to do the task without added pressure.

Because recording in 4K requires more charge, the battery’s overall performance is not poor. On the contrary, it performs exceptionally well because it occupies negligible space in the storm. When you wish to modify the ISO or the focusing points, your battery life will be significantly lower than this.

Since it has a capacity of 1100 mAh, the LPE12 Li-ion Rechargeable Battery is a good option for the Canon M50 Mark II. Because of the price range, continuous shooting is not something that one would expect, but to keep the camera as compact as possible, that is precisely what we get.

The standard number of shots taken from a full charge is 200. It is adequate, and you would get around 180 photos if you made relatively few adjustments to the ISO, aperture, and focal lengths. However, continuously switching lenses consumes more battery life and might impact the sensor. A short while ago, I published an essay titled “Can You Change the Lean While The Camera Is On?”. And you can verify.

Why does the Canon M50 Mark II battery drain so fast?

Because the circuitry continuously operates, the M50 Mark II and all other mirrorless cameras utilize far more battery power than traditional DSLRs. Therefore, maintaining constant control of the sensor and the LCD Screen is necessary. Digital single-lens reflex cameras include a viewfinder, but the connection is not electrical.

The viewfinder on DSLR cameras does not require any electricity, and the views generated by the screens waste almost little power. Electronic ViewFinder (EVF) displays a live image by combining the contents of millions of pixels and color points into a single image. However, the lack of mirrors necessitates a greater demand for electricity from the sensors and chips.

The battery’s capacity is another factor that affects how long the battery will last. For example, both the LP-E17 and the NP-FW50 have batteries with a total of 1020 mAh. However, the LP-battery E17 has a capacity of 1050 mAh. On the other hand, the storm that comes with the Nikon EN-EL15 has 1950 mAh, while the battery that comes with the Canon LP-E6N has 1865 mAh.

Because of this, DSLR cameras have a lifespan that is roughly twice as long as mirrorless cameras. In addition, mirrorless cameras are often relatively small since their makers strive to maintain portability and user-friendliness by keeping them as compact as possible. Because of the smaller form factor of mirrorless cameras, manufacturers cannot include large batteries in their products.

If the display of the mirrorless camera remains on for the entirety of the period, then a significant amount of battery power will be consumed. If you spend a lot of time composing your images carefully and reviewing them on the LCD, you will obtain fewer shots per charge than the 250 that are advertised.

Additional tasks such as zooming in or out, controlling the aperture, and adjusting the focus settings can significantly decrease a camera’s battery life. And the use of the flash just makes the problem much more severe. As a result, the numbers continue to fall, and the anticipated time is rapidly approaching zero.

There are a lot of mirrorless cameras out there, and many of them have image stabilization built right into the body of the camera, so you don’t even need a lens for it. The fact that this built-in picture stabilization also requires a battery significantly decreases the total battery life of the device.

What type of Battery Does Canon EOS M50 Mark II Use?

The well-known Canon Battery Pack LP-E12 is the new battery included with the Canon EOS M50 Mark II. This battery is a lithium-ion one, and it was manufactured by the Canon brand.

The power capacity of the camera, which measures 875 mAh, and the voltage, which measures 7.2, determine the number of photos that can be taken.

The battery, in general, is quite powerful and is regarded as a type of battery that can be used wherever you want, both inside and outside.

How to Improve the Canon M50 Mark II battery capacity?

First things first: before we get into some simple tricks to extend the battery life, let’s look at how long it takes the Canon M50 Mark II battery to charge and discharge. Therefore, it takes one hundred and ten minutes to go from zero to one hundred percent. In addition, the battery life is around one hundred minutes long when 4K mode is used continually.

To overcome the problem of M50 Mark II draining, here are some solutions that are easy to implement and highly effective. Mainly if you are a travel vlogger and you are filming outside. It will be pretty challenging to locate power outlets to charge the batteries. Also, it will eat up your initial time, and the delayed time may affect the color shift if you are filming documentaries or short videos.

What is the ECO Mode on Canon EOS M50 Mark II?

On the Canon EOS M50 Mark II, the “ECO Mode” is a setting that can be toggled on and off.

The ECO Mode on this camera was designed specifically to extend the life of the camera’s battery. The screen on the camera will get darker and reduce its brightness, which will help you conserve battery life. In addition, the net will switch off by itself after about two to three seconds of inactivity after the camera has been turned on but before it has been utilized.

You need to push the shutter button slightly to reactivate the screen, and you may accomplish this by pressing the button.

Give Continuous power with AC Adapter.

When I am not inside, I rely heavily on an AC adaptor that I carry with me. As a result, you can stream for an extended period and shoot lengthier films than usual. First, however, you must remove the camera’s factory-installed battery and replace it with the DC coupler.

And now, because the compartment is on the camera’s underside, you must insert the DC coupler via the little hole in the battery compartment. So, first, remove the battery and replace it with the DC coupler, as shown in the image. After that, put the cap back on the device. You may even apply some tape to ensure the connection is stable.

Using USB Drive Cable DC Coupler

Turn off Some Power-consuming Features

The capabilities and features of the camera are mysteries to those who are just starting out. The M50 Mark II has Wi-Fi, IS, continuous AF, an electronic viewfinder display, and more. You may look up videos on YouTube showing how to disable each function. To disable these functions, follow those procedures until you require one.

Turning them off might potentially lengthen the life of the battery. Therefore, after activating the Echo mode, be sure that these functionalities are disabled as well. Finally, always begin the day with fully charged batteries. I have no idea how often I have used dead batteries because I forgot to charge them beforehand, and the evidence is only there on the camera. Therefore, ensure that your camera’s batteries are ultimately charged before beginning the day.

Conclusion

If you are interested in purchasing a mirrorless camera, I believe it is essential to note that this model is an excellent option. However, you should have additional batteries because the battery isn’t perfect for specific individuals (Canon Battery Pack LP-E12). This will ensure that your experience of shooting images isn’t diminished.

I have written this post for you in the hopes that it will be of use to you in your search for further details on the battery life of the Canon EOS M50 Mark II camera.

Read More: